- Home
- ยป
- Our Products
- »
- Rotameter
Rotameter
Acrylic body Rotameter
Minimum Order Quantity: 1 Piece
Product Brochure
Model Name/Number | ATN-RO-AB |
Brand | ATN INSTRUMENTS |
Usage/Application | Industrial |
Range Ability | 0-5000 LPM |
Tube Body Construction | Acrylic |
Float Material | SS / PVC |
Application | Industrial |
TYPE : VARIABLE AREA
MEDIA : WATER
FLOAT : SS 304
BODY : IMPORTED TRANSPARENT UNBREAKABLE SOLID ACRYLIC
END CONN : SS BSP (M) CONN AT TOP & BOTTOM ON REAR SIDE
VALVE : SS FLOW CONTROL NEEDLE VALVE AT INLET PACKING : NEOPRENE
SCALE : ENGREWED ON BODY ITSELF WITH BLACK MARKINGS IN LPM
METERING TUBE : SELF DRILLED IN SOLID ACRYLIC BLOCK WITH UTMOST ACCURACY HAVING GLASS LIKE TRANSPARENCY
INLET & OUTLET : BOTTOM / TOP ON REAR SIDE
MOUNTING : ONLINE VERTICAL
OP. TEMP. : NOT MORE THAN 60 DEG.
ACCURACY : +- 2 %
Additional Information:
- Delivery Time: 1-2 WEEKS
Purge Rotameter
Brand | ATN INSTRUMENTS |
Application | Industrial |
Purge Rotameter | |||||||||||||||||||||||||||||||||||||||
Specification
|
By-Pass Metal Tube Rotameter
Application | Industrial |
By-Pass Metal Tube Rotameter | |||||||||||||||||||||||||||||||||||||||||||||
Suitable for measuring flow rates in 50 NB & above pipeline. Available in a variety of materials, carrier rings, impulse piping and rotameter as flow indicator.
This is basically an online Rotameter either glass tube placed in a By-Pass piping. The only difference is the range orifice of the Rotameter at the inlet. This range orifice is designed in such a way that the differential pressure through the By-Pass piping is equivalent to the differential pressure across the mainline orifice. With this arrangement, Metal Tube Rotameter in the By-Pass piping works as a Manometer. Specification
|
By-Pass Glass Tube Rotameter
Application | Industrial |
By-Pass Glass Tube Rotameter Suitable for measuring flow rates in 50 NB & above pipeline. Available in a variety of materials, carrier rings, impulse piping and rotameter as flow indicator. This is basically an online Rotameter either glass tube or metal tube placed in a By-Pass piping. The only difference is the range orifice of the Rotameter at the inlet. This range orifice is designed in such a way that the differential pressure through the By-Pass piping is equivalent to the differential pressure across the mainline orifice. With this arrangement, rotameter in the By-Pass piping works as a Manometer. | ||||||||||||||||||||||||||||||||||||||||||
Specification
|
Glass Tube Rotameter
Application | Industrial |
Glass Tube Rotameter
It is an instrument used to measure instant flow rate of Liquids and Gases. It is installed in the pipe line vertically upward with flanged or screwed connection.
Specification
Fluid | : | Liquids & Gases |
Density / Sp. Gravity | : | Up to 2.95 |
Viscosity | : | Up to 200 cp |
Design Temperature | : | Up to 150°C |
Design Pressure | : | Up to 15 Kg/cm² Depending on Model |
Measuring Range | : | 2.5 to 40,000 LPH of Water/Liquid & |
|
| 0.1 to 750 Nm³/hr of Air/Gas at NTP |
Line Size | : | Up to 4" NB |
Available Materials | : | MS/CS/SS304/SS304L/SS316/SS316L/ |
|
| PTFE lined MS or SS |
Connection | : | Flanged to ASA/BS/DIN/ Triclover Standard |
|
| Screwed to BSP/NPT(M/F) |
Accuracy | : | ±2% of FSD & ±1.5% on request |